Satcube - Temperature Calibration

In some cases, very high/low temperatures affected the IMU which resulted in slight disparities in the pointing values. When doing a calibration in the 0.7.31 software, the IMU now takes the temperature into account, which results in more precise pointing values. 

To perform the calibration, do the following:

1. Power up the Satcube.
2. Connect a laptop to the Satcube.
3. Set a static IP address
4. In your web browser, type in the following link and follow the steps: http://192.168.222.220:8080/calib.html

Advanced calibration:

This one requires a good inclinometer

http://192.168.222.220:8080/advanced_calibration.html