Satcube - Set static IP address

Set static IP

Step 1. Go into Windows settings> Network & Internet.

Step 2. Go to the ethernet tab> Change adapter options.

Step 3.Right click on the option that is connected to the Satcube> Properties.

Step 4.MarkInternet Protocol Version 4 (TCP/IPv4)> Properties

Step 5. Mark the box. Use the following IP address. Type in:

• IP address:192.168.222.217
• Subnet mask:255.255.255.248

Then click ok

You can now connect to the Satcube by typing in the IP 192.168.222.219 in the web browser. The username is “admin” and the password is “admin”.

You can also connect to the modem by typing in the IP 192.168.222.222. The username is “admin” and the password is either “iDirect” or “P@55w0rd!”.