WE DO NOT RECOMMEND DISABLING THE TRANSMISSION SAFETY. However, in some few cases the user might want to transmit without fulfilling the normal transmission criteria. If tests are to be performed inside where there is no signal, or if the terminal has a faulty calibration where the C/N / RQ are much better outside the normal 0.5 degrees requirement.
- Access the terminal web GUI. Please follow this guide to access the web GUI:https://support.satcube.com/kb/article/51-access-satcube-terminal-web-gui/
- Go to the settings tab.
- Klick on “Engaged” next to “Transmission safety"
- “Transmission safety” is now “Overridden” at the same time the “Off” button next to “Transmission” is no longer greyed out, which means the transmission can be turned on without meeting the normal criteria.